by Editorial Staff

Cherry

Download Cherry Mobile T2 SPD USB Drivers

On this page, you can download SPD driver to install any .pac and .p5c based Stock Firmware. If you would like to flash your Cherry Mobile T2 then you are on the right page. Here, you can download offcial SPD driver to connect your Windows 11 computer. If your device is dead, and now you are finding a way to unbrick it, then you are on the right page. Here, you can download and install SPD driver to flash your phone. You will learn how to install SPD Driver on Windows 10 and Windows 11 computer. In this post, you will get an official link to download the SPD Driver.

Download latest version of the SPD Driver, we have updated this driver on 11th May 2023 as per new requirements. Don't trust anyone else.

Do this at your own risk

Driver Name: SPD Driver

Driver Size: 20.4 MB

Please Wait...

How to Install SPD USB Driver on your computer?

This USB driver helps you to connect your device to the computer, if you want to tranfer your phone data to your PC or want install any stock ROM, firmware flash file to reset your Mobile T2. No doubt that you need to connect your phone to the PC for other process. In this article, we shared a few steps to install SPD USB Driver, if you would like to install custom ROM, custom recovery, TWRP Recovery, or installing firmware flash file on your Cherry Mobile T2. Follow the below steps:

  1. Download the latest SPD USB driver from the above Download Link. Now, extract it on your computer.
  2. Now, You should open Device Manager >>> Action >>> Add legacy hardware.
  3. After that, click the Next button to Add legacy hardware wizard.
  4. Now, You may choose “Install the hardware that I manually select from the list (Advanced)” and click the Next button.
  5. After successfully done, Show all devices, click the Next button and you must select the extracted file manually from your computer.
  6. Now, Click on Have Disk Button > Locate at the Android SPD driver on your Computer.
  7. Once SPD driver is listed in the blank area, now click on Next button to continue.
  8. Now, you will see a pop-up message "Install this driver software anyway" in the Windows security prompt window. If you would like to install, you need to click the correct option.

Finally, you have done successfully, click the Finish button to complete the installation.

Cool, you may enjoy your Cherry Mobile T2 is now connected with your Computer PC/laptop.

SPD stands for Spreadtrum Communications Inc., a fabless semiconductor company based in China. Spreadtrum specializes in the design and development of mobile communication chipsets and solutions. They are known for producing low-cost chipsets that are commonly used in feature phones, smartphones, and other mobile devices.

Spreadtrum chipsets are often found in budget-friendly devices, particularly in emerging markets. These chipsets provide basic functionality and support for various communication technologies such as GSM, GPRS, EDGE, 3G, and 4G LTE.

The SPD USB driver, as mentioned earlier, is a USB driver specific to devices that utilize Spreadtrum chipsets. It enables the communication between the device and a computer when connected via USB, allowing tasks such as data transfer, firmware flashing, and software debugging to be performed.

Read Me Once

SPD USB Driver process will affect your Cherry Mobile T2 phone data like images, videos, and files. We advise you before start SPD driver you need to create a backup and save it in a safe location.